Installation

Connecting Teltonika FMC003 to OBD Port

1. Locate the OBD Port

   • The OBD-II port is typically located under the dashboard, near the steering wheel
   • Common locations include:
     • Under the dashboard on the driver’s side
     • Near the center console
     • Behind the ashtray or storage compartment

2. Prepare the Device

   • Ensure the Teltonika FMC003 device is powered off
   • Check that the OBD connector is clean and free from damage
   • Verify that the device’s firmware is up to date

3. Connection Steps

   • Insert the OBD connector into the vehicle’s OBD-II port
   • The connector should click into place when properly seated
   • Do not force the connection if it doesn’t fit easily
   • Ensure the device is securely mounted to prevent movement while driving

4. Verification

   • The device’s LED indicators should show:
     • Power LED: Solid green when properly connected
     • GSM LED: Blinking when searching for network
     • GPS LED: Blinking when searching for satellites
   • Wait for the device to initialize (typically 1-2 minutes)

5. Troubleshooting

   • If the device doesn’t power on:
     • Check the OBD port for power using a multimeter
     • Verify the vehicle’s ignition is in the ON position
     • Try a different OBD port if available
   • If no GPS signal:
     • Ensure the device has a clear view of the sky
     • Wait at least 5 minutes for first GPS fix
   • If no GSM connection:
     • Check SIM card installation
     • Verify network coverage in your area

Important Notes

• The vehicle’s ignition must be ON for the device to receive power
• Some vehicles may require the engine to be running
• Keep the device away from extreme temperatures and moisture
• Regular maintenance checks are recommended to ensure proper connection